« 6 1/2 2-WAY 100-WATT Oval In-ceiling Lcr Speaker | Main | 4 Black Universal Satellite Speaker Mounts / Brackets for Walls and Ceilings 1VE »
How to Choose an Office Sound Masking System
By admin | February 23, 2010
What is an Office Sound Masking System?
Office Sound Masking Systems already in widespread use for over 50 years were in 1960 the Department of Defense developed and used to provide a better acoustic privacy in office space since then.
The basic idea of masking the sound is that when I complete the sound spectrum, making it very difficult to get talks under way with my understanding. And if I can not understand them, is veryless prone to shake. Thus, both the office sound masking systems to improve office life and increase productivity in the office.
The human ear acts like a radar dish – always looking for the sound that indicates a type of structure. The ears are bombarded with sounds all day – and your brain to filter out the useful from the extraneous sounds theirs. So it appears to the structure. Language and music have the structure, for example. The sound of a twig snap or a door creakingcommunicate information that is useful for your "fight or flight" instinct. On the other hand, your brain will tune the impact of the food court at the mall, or other constant sounds, like the fan of the computer. The sound does not vary, is not structural, so your brain to determine what is to communicate something and ignores the sound and explore sounds structured.
How can Office Sound Masking SystemsWork?
Sound masking effective integrated system should be uniform in terms of both sound spectrum and volume. All modern office sound masking systems use a very special audio frequencies that are designed to mask the human language. System of old-style depends on the competence and commitment by the installer properly tune them, and the newer systems are tuned, but all are designed to provide a masking sound spectrum, which is precisely the spectrum produced by targets human language. Soultimately, it falls to the uniform system of masking sound, office space treaties.
Think about your office space like a balloon inflated to a birthday party. At each point inside the bubble is the pressure per square inch (PSI) today. The best sound masking is the one who gives the most consistent form of the sound at any point in the office.
And Office Sound System Mask is the best?
There are two main types of noisenetwork systems, plenum systems, direct and systems field, and the latter is generally considered more effective. If acoustics expert David Sykes wrote the Working Group for Electronic Data Interchange (Wedi) notes that "[systems in the direct field of vision] is the newest, most of the cost, easy to install and are widely used by 1998.
Initially, all forms of sound, which was placed in a grid pattern above the ceiling. Oratorios children were bolted toconcrete deck above, and suspended from a chain. The speaker emits sound to the bridge of concrete and bounce them in the area between the bridge and the roof tiles, known as the plenum. So the old system was called 'plenum systems. "The idea was that the sound would jump around and fill the plenum, and then filtered through the ceiling tiles in offices below. This configuration is necessary 50 years ago when theSpeaker technology available, and the presence of a relatively uniform structure and gaps in the ceiling plenum. It makes sense: the speaker when it was hard and had a relatively narrow spread in the elbow, but if you can mute a po 'around, overcomes this limitation.
But, as space plenum chamber filled to the ceiling and the churches have become more complex, it was more difficult to actually get the sound to the plenum completely uniform, much less filterout of the office space uniformly. Now, a typical plenum space is filled with heat and air conditioning ducts, and the network of low voltage cables and pipes and electrical and lighting. Congregations ceiling was an acoustic nightmare of a mixture of reflective and absorbent materials, that both series and volume depending on where you are. To compensate for this system very plenum developed increasingly complex ways to adjust their chests(usually in 3 areas speaker). But – as a patch for a bug in a computer program – was ultimately only a band aid solution.
Then acoustic engineers continue to work and came up with the prototype of what is ultimately, as a direct sound field masking system was known. Realizing that the problem was not the continuation of a patch for the old ways of doing things to be solved, speakers were drawn from the plenum. But just using speakers designed to bounce soundwhole House does, not because they have a relatively narrow angular spread used. They use old speakers in a new configuration does not solve the problem, because it has not yet led to a non-uniform, hot and cold spots.
Finally – home loans from industry, engineers have developed a patented ultra-wide dispersion speaker angle, the distribution of sound from an angle of 170 degrees. Seems to be the key that opened a new office effective noisemask – and because the direct result of the system of field is easy to remove the variable from person to compensate the system and technological systems, with their spread has added the missing points, it is almost an error rate was not existent.
Therefore, a direct field sound masking system is measurably the best solution for your office sound masking needs.
Related posts:
- In Wall Surround Sound Speaker
- Wall Home Theater Speaker
- Plasma Entertainment Centers
- Bose L1 system is different from the ordinary PS Systems
- Planning Speaker Flush
- Best computer speakers
- In-Wall Speaker Information
- Top Christmas gifts for dad gifts to smile 2009-3
- Hold talks with hidden speakers, wall and ceiling
- Wireless Surround Sound Systems vs normal
Topics: Ceiling Speakers Articles | Comments Off
Comments are closed.