 Amazing Mount!!!! |
| Review Date: January 31, 2009 |
| Reviewer: Ryan Lesniewski, Cleveland, OH |
These mounts are the best available for ceiling mounts! Easy to install, and they don't require mounting into a stud. A drill bit is included if you have to drill into your speakers to intall the mounting plate. I was able to unscrew the keyhole bracket on my Polk Monitor 30's and use those holes for the mounting plate without any problem.
Once you have these attached to the ceiling mount, they are easy to maneuver so they can face any direction that you need them to face. After you have them facing where you want and you tighten the hex screw down, these mounts WILL NOT MOVE. The 20lb weight rating should be strong enough to handle almost any bookshelf speaker you can imagine. I bought 4 of these for my 7.1 setup and I couldn't be happier! |
Speaker Mount
|
| Review Date: March 16, 2007 |
| Reviewer: Mike R, MD |
| The ceiling speaker mount was easy to install. I mounted a 12 pound speaker on the mount, which was designed to support up to 20 pounds. It held the speaker securely into position. |
These Things (Don't) Rock!
|
| Review Date: February 8, 2008 |
| Reviewer: Kevin, Ohio |
These turned out to be the perfect mounts for my application. I have unusually heavy bookshelf speakers (Aperion) that I wanted to mount for use as my rear speakers in a 7.1 setup. I had trouble finding sturdy and unobtrusive mounts that would support them and give me some flexibility in terms of positioning. My speaker company recommended these, so I gave them a shot. I needed to get the 20.0 ones (they have smaller ones with lighter load ratings) because my speakers were pretty close to the 20-pound limit. They mounted easily and firmly to my ceiling and attached to the back of the speaker using the included bracket with no problem. The best thing going for these is the ball socket. I knew from experience using Yamaha drums that have ball mounts for their toms that you could lock them into place and they'd stay there, even under heavy pounding. You can swivel, angle, and aim them any direction you want, tighten the allen bolt, and it will stay exactly in position. I can try to rock my speakers by hand and they barely move. After over a year in place at somewhat odd angles (pointing in and down), my speakers haven't slid (crept) a bit. In other words, they don't rock at all. In terms of utility, they definitely do rock!
Highly recommended for everyone who needs a sturdy, yet flexible heavy-duty speaker mount that can work on either the wall or ceiling. |
works well
|
| Review Date: September 14, 2009 |
| Reviewer: D. Walker, Philadelphia, Pa |
| mounted on a wall, they hold a speaker, but won't really hold the bottom of a speaker from resting against a wall, but i wouldn't expect them to. from the ceiling they work perfectly. |
Strong and looks good.
|
| Review Date: May 14, 2010 |
| Reviewer: George J. Perkins, Madison Wisconsin |
| I had some big "bookshelf" speakers I wanted to use as surround speakers. It takes some effort to attach these mounts to a supporting joist, but they are strong and the clamp is holding a heavy speaker in position (no sag). |
Best buy for " Omnimount 20.0 Stainless Steel Speaker Mount (White) ", Lowest Price Omnimount 20.0 Stainless Steel Speaker Mount (White) + Free shipping. Get Omnimount 20.0 Stainless Steel Speaker Mount (White) Now! |
No video reviews found for this product.